Sign up

Home /
Power Supply for HiFi /
Battery Charging and Protection Module

USB-C PD2.0/3.0 to DC Decoy Fast Charging trigger[788]

★★★★★(0 recommends)



Add To Cart
Buy Now



This board is a highly cost-effective charging trigger to make your charger output desired voltage within 5 levels it supports (5V, 9V, 12V, 15V, 20V), equipped with USB PD protocol, supporting PD3.0/2.0, BC1.2 and other fast charging protocols. It is highly integrated with built-in PD communication module, widely applicable to various electrical equipment improving power, such as wireless charger, electric toothbrushes, rechargeable shaver, electric tools with lithium batteries and so on.

This board employs by-pass design, therefore, the output power and current would decide on the output capacity of your charger.


1. This board only supports trigger for PD, not applicable to QC or other fast charging protocol.

2. This device supports max voltage as 20V and max current as 5A. Its operating power can reach 100W. Please make sure your device is capable of outputting 5A.

3. The 5 levels of voltage that the device supports are 5V-9V-12V-15V-20V. You can switch among these levels through the button on board.

4. This device is equipped with memory function, which means that it will be memorized after setting, and the setting will be restored automatically after power on again.

  • TypeOthers
  • StyleModule & Board
  • Output ChannelSingle
  • Supporting Max power up to 100W
  • Supporting PD3.0/2.0, BC1.2 and other fast charging protocols
  • Supporting USB Type-C PD
  • Universal Type-C Input
  • Supporting 5 levels voltage, switching through buttons
  • Heat Dissipation through PCB Copper
  • Universal Type-C Input
  • Size: 2.00 x 0.75 inches
Specifications typical @ +25℃, powered by 5V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter Conditions Min. Typ.  Max. Units
Input Voltage - 5 - 20 VDC
Output Voltage - 5 - 20 VDC


Copyright 2023 @ Sure Electronics Co., Ltd.