JAB3 – 1100 is an All-in-one mono Class D audio amplifier board integrated with high performance DSP – ADAU1701, outputting 100W into a 2Ohm load based on Texas Instruments TPA3116 chip. With the integrated DSP chip, JAB3 can be applied to various DIY audio, commercial or industrial applications such as digital crossover, bass enhancement, loudspeakers, kiosk, etc. After connection with WONDOM programmer – ICP series, JAB3 supports programming with SigmaStudio, remote control through APP or PC UI.
Video for how to achieve I2S input and output of JAB3: video link
Video for introduction of JAB3: video link
Video for connection with JAB2 and APP control: video link
Video for reprogram DSP with SigmaStudio: video link
Miumax Download link for Android Phone: video link
Miumax Download link for iOS Phone: Please go to APP Store and search “Miumax” directly.
Integrated with DSP
The on board fully programmable 28-/56-bit audio DSP ADAU1701 from Analog device is competent in various signal processing applications. This process can compensate for real-world limitations of speakers, amplifiers, and listening environments, providing dramatic improvements in perceived audio quality.
Four potentiometers are provided on JAB3 for real time hardware control of the whole audio system for volume, gain and high / band pass filter.
Supporting SigmaStudio Program and Remote Control
Different applications have unlike requirements on audio as the speakers, the environment and the preference are different. To give customers better control of audio systems, Sure Electronics has released In-circuit programmers (ICP series), with connection of which, you can program DSP with SigmaStudio or remote control the system with APP or PC UI.
We have developed an APP – Miumax for remote control, with which, you can adjust volume, gain, frequency and EQ setting. PC UI is also available for different applications as digital crossover, bass enhancement, subwoofer, and so on.
Sure Electronics has provided open-sourced files for customers to start the project quickly. You can download on the “Download” part.
High Quality Audio Performance
Thanks to dedicated PCB layout design and engineers’ attentive debugging, this JAB3 - 1100 audio amplifier board features high audio performance, whose SNR is 88dB and THD+N performs well as 0.03% @ 2Ohm, 1W, 200Hz.
Low Power Consumption and Long Playback Time
Power management system and Signal level sensor system are employed on JAB3 for low power consumption. We have preset a threshold on the input voltage of the signal. When there is no signal detected in 5min, JAB3 would enter into standby mode automatically.
This JAB3 - 1100 audio module dissipates only 150mW in standby mode. The extremely low power consumption ensures long playback time especially when JAB3 - 1100 is powered by battery boards, which is absolutely an advantage for portable Bluetooth speakers.
Supporting Battery Power
A DC10V-26V power supply is required to power JAB3 - 1100.
In addition to power supply, JAB3 also supports battery power, which greatly improve the portability and flexibility of audio systems.
Please kindly noted that MPPT circuit is not employed in JAB3. So JAB3 cannot be used to recharge batteries. If you only buy JAB3 and want portable battery power, it is recommended to use WONDOM Battery charging, protection and balance board – BCPB series. If you have a JAB1 / JAB2 at hand, you can use the WONDOM Battey charging and protection board (JAB – BE, AA-JA11113) for power.
Easy for Installation
Four screw holes provided make this Bluetooth amplifier board easy for installation and quick for integration in any cabinet. We provide a Functional cables kit (JAB - FC) for your convenient operations. Furthermore, a 3.6’’ x 2.7’’ L-style aluminum bracket (JAB - LAB) is available to fix the Bluetooth amp in wiring process and to install the board to cabinets.
Build Audio 2.1/4.0 system with Bluetooth and DSP
JAB2 can connect with mono JAB3 to build an audio 2.1 system or connect with stereo JAB3 to build an audio 4.0 system. This built system will be integrated with both Bluetooth and DSP, suitable for portable Bluetooth speakers and digital crossover applications. A Functional cables kit (AA-AJ11116) is released for your convenient connection. As for the connection, please kindly take the
1pc AA-JA31181, JAB3 - 1100
1pc power supply cable
1pc stereo speaker cable
1pc 3.5mm AUX IN cable
- Number Of Channel(s)1
- Output Power100
- Size3.6 x 2.7 inches (91.44mm x 68.58mm)
- Heat DissipationHeat Sink
- Supported Parallel Bridge Tied Load ModeNO
- inputSingle ended Line-in,
- Power Voltage12V-26V
- 100W@2Ohm, THD+N= 1%, 200Hz
- 36 x 2.7 Inches PCB Size
- Battery Board Supported
- DSP Integrated
- Gain of Speaker Output Adjustable
- Band-pass Filter of Speaker Output Adjustable
- High-pass Filter of 3.5mm
- Headphone Output Adjustable
- Volume of Speaker & 3.5mm
- Headphone Output Adjustable
- Signal Level Sensor System
- External 3.5mm AUX IN Port
- Power Switch Port
- Compatible with JAB2
- 3.5mm Headphone Output
|Number of Channels||-||-||1||-||-|
|Minimum Load Impedance||-||1.6||2||-||Ω|
|Nominal Power Requirement||@24V, 200Hz||-||150||-||W|
|Operating Voltage||@200Hz, 2Ohm||12||24||26||V|
|Idle Power||Signal detected||-||2||-||W|
|No Signal detected||-||80||-||mW|
|Switching Frequency||SD Floating@24V||-||400||-||kHz|
|Power Consumption||1/4 of max output power@2Ohm, 24V, 200Hz||-||35||-||W|
|1/8 of max output power@2Ohm, 24V, 200Hz||-||20||-||W|
|Control||Standby (Low = inputs enabled)||High-level Input Voltage||3.3||-||-||V|
|Low-level Input Voltage||-||-||0.8||V|
|Mute (High = outputs enabled)||High-level Output Voltage||3.3||-||-||V|
|Low-level Output Voltage||-||-||0.8||V|
|Standby Power||SD short to GND, only when low power module available||-||150||-||mW|
|Under Voltage Protection||-||10.0||10.4||10.8||V|
|Amp Gain||@2Ohm, 200Hz||-||26||-||dB|
|DSP Gain||SE1 (Single Amp)||@2Ohm, 200Hz||-60||-||10||dB|
|Input Sensitivity||100W@2Ohm, 200Hz, 26dB||-||770||-||mV|
|Filter Gain||Butterworth, Q= 0.707||-||4||-||dB|
|SNR||100W@2Ohm, THD+N=1%, 26Db, A-weighting||88||dB|
|THD+N||1W@2Ohm, 200Hz, 26dB||0.03||%|
|10W@2Ohm, 200Hz, 26dB||0.05||%|
|Supported Sampling Rates||-||-||48||-||kHz|
|Output Noise Level||A-weighting, Input Connected to GND, 26dB||240||uV|
|Max output Level||J3, 3.5mm Headphone Output Connector||4.5||dBu|