Is it possible to get this board also with bluetooth v5.0? I would not mind if it is v4 or v5 but probably the range and sound quality is better with v5. Best regards

Hi, Nikolaos. Thank you for your kind suggestion for our products. The upgrade of Bluetooth chip in Bluetooth receiver board is in plan now. Wish this could help you. Have a nice day~

Hello, is this board apt-x compatible? Do you also sell a 3,5mm jack with the right connector for this board. Thanks a lot

Hello, Alex. Thank you for your interest in our products. The Bluetooth on the BRB6P supports apt-x. The basic cables coming with BRB6P are as follows: Bluetooth antenna x 1 3.5mm AUX IN cable along with the connector x 1 PH-4Pos cable x 1 Screw x 4 Wish this could help you.

Hello, I would like to change the equalizer-settings of the built-in CSR8645 Chip. Is this possible with a programmer?

Hello, Philipp. Please kindly note that the equalizer settings cannot be changed.

Hello the AA-AB41158 bt reciver has stereo output, how should I connect to mono AA-JA31211to listen both channel ? Thanks

Hello, Simone. There is a 3.5mm line output (J4) on BRB6P. You can connect with AA-JA31211 through the this port. Wish this could help you.

Hello , does BRB6Ppower button could power or stand by jab amplifier board too? Thanks Simone

Hi, Simone. Thank you for your interest in our products. The power button on BRB6P cannot control JAB amplifiers. Wish this could help you.

Hi , when i conect the reciver through the 3.5 mm out to my jab 3 line in there is a very annoying transmission sounda all the time. You can hear that even when the amplifier is playing in low volumes any suggestion would be more than helpfull thanks.

Hi, Athanasios. Please try to use one cable to connect the ground of the JAB3 and the BRB6P. If there is still noise, could you send a video to store@sure-electronics.com? We will give suggestions based on your connection. Wish this could help you.

Hi what cable do I need in order to connect a BRB6P with a JAB3 amplifier?

Hi, Athanasios. To connect BRB6P with JAB3, audio cable (3.5mm to 3.5mm) and power cables would be required. Wish this could help you.

Hi can I connect this blutooth reciver to control a Jab3 amplifier instead of using a traditional potenciometer? I like the conrol layout with buttons rather than a Knob. Thanks in advance.

Hi, Athanasios. Thank you for your interest in our products. You can connect BRB6P with JAB3. But please be noted that, the potentiometers on JAB3 is used to control gain, volume and cut-off frequency (Please refer to datasheet for detailed information.) and the buttons on BRB6P is used to control volume, switch songs and play/pause. The functions are different. If you want external potentiometers instead of on-board ones, we can customize for you. Since there is modification, MOQ would be required. Please send emails to store@sure-electronics.com if you have interests. Wish this could help you.

Hi can I connect this blutooth reciver to control a Jab3 amplifier instead of using a traditional potenciometer? I like the conrol layout with buttons rather than a Knob. Thanks in advance.

Hi, Athanasios. Thank you for your interest in our products. You can connect BRB6P with JAB3. But please be noted that, the potentiometers on JAB3 is used to control gain, volume and cut-off frequency (Please refer to datasheet for detailed information.) and the buttons on BRB6P is used to control volume, switch songs and play/pause. The functions are different. If you want external potentiometers instead of on-board ones, we can customize for you. Since there is modification, MOQ would be required. Please send emails to store@sure-electronics.com if you have interests. Wish this could help you.

Where to buy J5 PH-4POS-2mm

Hi, Lars Erik. You can buy the connectors on eBay. Or if you only need several pieces, we can send to you as gifts. Please place an order with us then send an email to store@sure-electronics.com to remind us. We will put the connectors in the package together with the goods you buy. Wish this could help you.

Can you please provide a picture where the positions of the mounting holes are visible? In the Datasheet only the outer dimension is visible.

Hi, Sebastian. Please take the attached picture for reference. Wish this could help you.

Can I use this with the 5s battery charging board (BCPB4)?

Hi, Brennen. You can use the BCPB4 to power this Bluetooth Audio Receiver Board V4.0 with Control Panel - BRB6P. Wish this could help you. Please feel free to contact us if you have any other questions.

How do connect this up to power on and and turn off the backlighting when use a battery board SKUPS-BC12113 and SKUAA-AB32179 using a meanswell power supply

Hi, Mark. You can use battery board to power BRB6P through J5 and turn off the backlight through SW8 of BRB6P. The user manual of BRB6P can be downloaded in the product page. Wish it could help you. If you still have problem, please contact us with store@sure-electronics.com.