Description
Product Resume
This product integrated with TA2024 not only provides dream sound but also has high efficiency, thus it can dissipate the heat after long-time working to ensure that the amplifier can works in a stable condition for long time. It integrates a high-quality rotary encoder which employs high-quality digital volume control IC ensuring precise shaft rotation and accurate volume adjustment. This product supports dual-channel amplification and each channel is rated at 15W. With built-in MCU, it can provide over/under voltage protection, low current protection and display LED state.
Video for introduction: link
- StyleFinished Amplifier
- Number Of Channel(s)2
- Output Power15
- SizeOthers
- ChipsetOthers
- Supported Parallel Bridge Tied Load ModeNO
- inputSingle ended Line-in,
- Power Voltage9V-14V
- Size: 6.4 inch x 2.9 inch x 1.9 inch
- Signal Noise Ratio: 90dB
- Power supply: DC 9V to 14V
| Parameter | Conditions | Min. | Typ. | Max. | Units |
| Power Supply | - | - | 12 | - | VDC |
| Idle Power | SD Floating | - | 1.2 | 2.5 | W |
| Maximum Current | 30W @ 4Ohm | - | 3.1 | - | A |
| Efficiency | 15W @ 4 Ohm | 80 | - | 85 | % |
| Minimum Load Impedance | - | 4 | - | Ω | |
| Switching Frequency | SD Floating | - | 400 | - | KHz |
| Parameter | Conditions | Min. | Typ. | Max. | Units | ||
| Gain | Max Volume Level | 18 | 20 | 22 | dB | ||
| Input Sensitivity(RMS) | @ 4 Ohm, 15W, 1KHz, RCA | - | 662 | - | mV | ||
| Input Impedance | RCA | - | 20 | - | KΩ | ||
| Output Power | @ 4 Ohm, THD+N 1% | - | 9 | - | W | ||
| @ 4 Ohm, THD+N 10% | - | 15 | - | W | |||
| Supports Sampling Rate | - | 32, 44.1, 48, 88.2 and 96 | KHz | ||||
| Maximum Sampling Word Length | - | 24 | Bit | ||||
| Bandwidth @ ±3dB | @ 4 Ohm | 20 | - | 20K | Hz | ||
| THD | @ 4 Ohm, 1W, 1KHz, RCA | - | 0.037 | - | % | ||
| Output Noise Level | A-weighting, Input Connected to GND | - | 134 | - | uV | ||
| SNR | 9W @ 4 Ohm, THD+N 1%, RCA Input | - | 83 | - | dB | ||
