15
07/2019
WONDOM High Power Dual Power Supply Series is a highly efficient and highly reliable series based on high performance IRS2092 chip, power ranging from 500W to 3000W. The entire series is equipped with complete protection circuit and supports flexible load characteristic and wide load range. Supporting wide frequency range is another highlight of this series.
Flexible Load Characteristic
Electronical appliances can be divided into resistive load, inductive load and capacitive load. It’s easy for amplifiers to drive resistive load such as the speakers. Since the impedance of the inductive load and capacitive load would change with frequency and there will be reactive power when driving both inductive and capacitive load, it raises high requirements of the amplifiers.
WONDOM high power dual power supply series can handle with inductive load and capacitive load. However, extra attention should be paid for any operation with purely capacitive loads. For any non-audio applications, customers are suggested to send an inquiry e-mail to Sure Electronics for system compatibility confirmation or face the consequences.
Wide Load Range
With its low output impedance, the entire series supports wide load range, showing stable performance with 1Ω without impact by loudspeakers loading characteristics. Therefore, the high power dual power supply series is capable of standing and dealing with high current.
Wide Frequency Range
Audio frequency range is 20Hz-20kHz. Thanks to our exquisite PCB layout design and the special technology employed in our amplifier, the high power dual power supply series can handle with wide bandwidth from 10Hz to 22kHz with uncompromising frequency response, not only meeting requirements of audio system but also satisfying special demands of some applications such as Physical Therapy Machines, Underwater Acoustics and so on.
This series is able to support extremely wide frequency range as 5Hz-80kHz through some configurations. If you have any need, please contact us.
High Output Voltage
The maximum output voltage of WONDOM IRS2092 series can reach 200V÷2.828≈70.72V>70V in half bridge structure. And it can deliver 200V÷1.414≈141.44V in full bridge structure.
Another series of amplifiers that can deliver 280V RMS output voltage will be released soon, so stay tuned.
DISCLIMER
WONDOM standard products can only be used in audio applications and there is a big difference between the standard products and the specialized version on protection and performance. If you have any requirement on non-audio applications, please contact us to get the products specially optimized for specific applications.
Video
In this video, we will use WONDOM 1 X 2500WATT CLASS D AUDIO AMPLIFIER BOARD - IRS2092 (AA-AB31491) to drive the air conditioner. The video of frequency range testing, driving electronical stove and driving the coil to heat up water and the video of actually showing 2500W RMS power have been uploaded to our YouTube channel. You can click the following link to feel the powerful strength of WONDOM high power dual power supply series based on IRS2092.
14
06/2019
Sure Electronics has been committed to providing customers with Safe, Utility, Reliable and Efficient audio products since its birth.
To streamline the company organization and offer our customers with better service, Sure Electronic has migrated the production to an ISO 9001:2008 verified factory located in Perai, the Free Trade Zone of Malaysia in April 2019, which means some wholesales customers’ orders will be delivered from Malaysia directly from now on. (Please confirm with us before shipment.)
Thank you for your consistent support and trust in Sure Electronics. We will keep on trying our best to provide high quality products to satisfy your requirements.
15
05/2019
Reliability is one of the paramount factors when both audiophiles and industrial customers select audio products. Only when the components are reliability, can the whole system run stably for long time.
Sure Electronics has been committed to provide customers with Safe, Unity, Reliable and Efficient audio products since its birth. With ten years’ experience accumulated in highly demanding applications, Sure Electronics has built a complete Test System with full set of test reports, covering all phases from development to shipment, making a strong endorsement for the reliability of our products.
HASS (Highly accelerated stress screen)is implemented in the production phase to ensure that all improvement measures found in HALT can be implemented and make sure that no new defects are introduced due to changes in production processes and components.
All products will be tested at -40℃- 65℃ in half output power for up to 1000 hours to provide validated MTBF data. Meanwhile, we will use the signal generator to sweep in the frequency range of 20Hz-20kHz and observe the output waveform. Only when the products pass all tests, can they be put in storage.
All of WONDOM products must pass the HASS test and can be used at -20℃-55℃ and -40℃- 65℃. The operation temperature for our standard products is -20℃-55℃. If customers if the customer needs products for the temperature range of -40℃- 65℃,please contact us and we will also provide the corresponding test report.
In the following video, we will use AA-AB32361 (MPAB2-160) 2 x 160Watt class D audio amplifier board as an example to show you the general flow of HASS.
04
03/2019
Sure Electronics Co., Ltd. will participate in 2019 Asia Amusement & Attractions Expo (AAA) from May 9, 2019 to May 11, 2019.
In this exhibition, Sure Electronics mainly displays the highly integrated KAB series specially designed for arcade machine and amusement equipment, which extends from our standard product, featuring high performance-cost ratio, high reliability and full protection.
Taking requirements of amusement equipment application, we provide amplifiers from 30W to 400W, including 300W subwoofer, meeting customers’ demands of 2.0/2.1/4.1/5.1/7.1 audio system. Abundant ports for high-speed input are provided in KAB series such as HDMI, Coaxial, Optical, USB, RCA and Bluetooth, opening up possibilities for swift and convenient connection with System-on Chip (SoC) or other peripheral equipment. We also provide audio isolation solution for customers.
KPS series, the power supply matched with KAB amplifier, provides 12V/24V output voltage, which meets the power of amusement equipment. Since there are many electric devices in amusement equipment and their power are different, this power supply series are equipped with auxiliary power port, which can be used to power other devices such as the SoC, greatly saving the space and the cost of whole system. In addition, amplifier board with DSP integrated is also available in Sure Electronics.
Our Booth No. is Hall 1.1, 1A121 and we sincerely invite you for a visit.
2 x 30 Watt Digital Input Class D Audio Amplifier Board & DAC - TAS5756
26
02/2019
Acoustic wave is the form of energy known to have the ability to transmit over long distance underwater for now. According to its features, it is widely used in Underwater Acoustic applications, such as Positioning, Navigation, Communication and Measurement.
For UWA customers, Sure Electronics can provide full set of solutions, including High Efficiency Transducer, Wide Frequency Range Hydrophone, Low Noise Pre-amplifier, High Reliability Power Supply and Broadband Amplifier.
The special capacitive load characteristics of the transducer raise higher requirements for the power amplifier’s ability of dynamic response and current driving. Based on advanced Broadband Power Amplifier technology, Sure Electronics provides 200W-2kWrms complete solution for wideband amplifier, featuring high output voltage up to 1200V, comprehensive input and output protection, high power, high efficiency and reliability.
Please contact us for any inquiries.
26
02/2019
Game Machine and Self-service Equipment are more and more popular nowadays and most of them can produce sound to create an immersive environment or give users the flow guide or other help. High integration has been an inevitable trend in such Industrial applications.
WONDOM KAB series (Audio amplifier modules designed for Kiosk Applications) is a highly cost-effective audio amplifier series with full protection extended from our standard product with optimization in system integration of Game Machine, ATM, Service Robot, vending machine application, ensuring controllable cost and short design cycle for fast transition from prototype to market. KAB series is capable of meeting requirements of easy integration, high reliability and low power consumption in today’s game machine and self-service equipment amplifier marketplace. Abundant ports for high-speed input are provided in KAB series such as HDMI, Coaxial, Optical, USB, RCA and Bluetooth, opening up possibilities for swift and convenient connection with System-on Chip (SoC) or other peripheral equipments. Microphone amplifier and headphone amplifier are available when recording and audio reproduction through headphone are required. Auxiliary power port in KAB series is reserved for powering up SoC, saving much space and cost of whole system.
We provide 2W/8W/15W/30W/100W stereo/multichannel audio amplifier for customers’ choice. Customers can use the KAB separately or configure them into 2.1/4.0/5.1/7.1 audio system to their demands.
Please contact us for any inquiries.
26
02/2019
Long Range Acoustic Devices are used for remote transmission of messages or warning signals in higher volume to achieve the purpose of alerting, deterrence, dispersing or defensing, widely applied in Disaster Warning Sirens and Rescue, Frontier and Civil Defense, Law Enforcement and Management, Dispersing and Protection and so on.
Equipped with advanced power supply Auto-switch and speaker voice coil Thermal Management circuit, Sure Electronics provides customers with full set solution of long range acoustic devices with SPL up to 140dB, featuring complete protection circuit, light weight, compact size and high efficiency.
The power of WAD1140 is out of proportion to its size. It was proven to be able to produce 140dB/m. The instantaneous SPL of WAD1140 at 100m distance can reach 100dB and it can maintain 80dB at 1km distance, fully meeting the requirements of warning or deterrence over a long distance.
26
02/2019
Battery Charging Board ensures the portability of audio system. Sure Electronics released Battery Charging and Protection Board – BCPB series, featuring high efficiency and high reliability. It covers battery charging and protection board with holders designed for 1S 26650, 3S 18650 and 5S 18650/26650 Lithium battery. You can always find the satisfactory solution with BCPB series whether you are looking for exquisite pack or large capacity.
Compact Size for High Portability – BCPB1
BCPB1 is a highly efficient and highly reliable lithium battery charging and protection board with 5V boost circuit integrated. It is designed for 1piece 26650 Lithium Battery and can be used as a power bank for Mobile Phones and Raspberry Pi.
Its half-palm size makes it suitable for portable DIY applications. With 5V USB discharge port, this board can provide maximum current as 2A. So if your iPad or mobile phone is out of power, this battery board can be used as a power bank to charge it.
With protection circuit, the Lithium battery charger and balance protection board works constantly to monitor each cell’s voltage, the current of charge or discharge, and the temperature of the environment to provide overcharge, over-discharge, over-current and over-temperature protections, etc.
Besides, BCPB1 is specially designed for powering Raspberry Pi, offering a convenient power supply solution for DIYers.
Raspberry Pi can be easily and conveniently installed on BCPB1 through the pre-mounted standoffs and be powered by the direct contact of pogo pin on BCPB1 and POS4. And there are four indicators to show the remaining battery power.
Designed for Portable Bluetooth Speaker – BCPB2
The BCPB2 - 3S 18650 Lithium battery charger and balance protection board is a charging and protection module for 3 pcs Lithium batteries pack. It is highly integrated and can be used as portable power bank. With MPPT charging ICs equipped, this board works as charger and supports 15-24V power supply for charging. Four indicators are equipped as battery status reminder. The Lithium battery charger and balance protection board works constantly to monitor each cell’s voltage, the current of charge or discharge, and the temperature of the environment to provide overcharge, over-discharge, overcurrent and over-temperature protections, etc.
When fully charged, it can provides 12.6V. With 3.6 x 2.7 inches size, the BCPB2 can be connected with JAB series through L-type Aluminum Bracket for portable Bluetooth speaker.
Larger Capacity and Longer Serviceable Time – BCPC3/4
As the new comer of BCPB (Battery Charging and Protection Board) series, BCPB3/4 inherits the high efficiency and high reliability of BCPB2, offering more battery holders and larger capacity. BCPB3/4 is designed for 5pieces 18650/26650 Lithium Batteries in series and can be used as a power bank for Routers, Raspberry Pi, High power portable speakers and Mobile phones, which is widely used in Home DIY applications to save your precious time from the connection of electric wires. Supporting wide range of charging input voltage and hybrid charging sources is one of the highlights of BCPB3/4. Any 5-24V 2A adapters can be used to charge the batteries with BCPB3/4.
With MPPT charging circuit equipped, this board works as MPPT solar charge controller and supports up to 35W charging ability. Besides that, the balance and protection circuit constantly to monitor each cell’s voltage, the current of charging or discharging, and the temperature of the environment to provide overcharge, over-discharge, output over-current, short circuit, charge over-current and over-temperature protections, etc.
26
02/2019
Ground noise commonly exists in analog audio system, which gives listeners bad hearing experience. Nowadays, system-on-chip is used in industrial applications such as game machine, vending machine and other self-service equipment, making it essential that there is digital input interface on the audio amplifier.
On basis of the TAS5756 from Texas Instruments, Sure Electronics launched new amplifier board – AA-AB32255, a digital input high performance Class D audio amplifier with integrated audio processor. It provides 20Watts stereo, making it suitable for PC audio, Sound bars, Active speaker, DIY applications such as Raspberry pi.
AA-AB32255 supports I2S digital input and supports high resolution playback up to 192kHz/24bit so customers can enjoy music same as originally recorded. Its advanced design offers low noise, high SNR and low THD+N as 0.08%, delivering premium audio quality to listeners.
Besides, this board also provides 3-wire audio digital interface (no MCLK required), supporting Raspberry Pi, offering a swift and convenient audio solution for DIYers. It can also work as a high performance stereo audio DAC and supports direct analog output without amplification.
Search AA-AB32255 in http://store.sure-electronics.com for more detailed information.
2 x 30 Watt Digital Input Class D Audio Amplifier Board & DAC - TAS5756
26
02/2019
To keep its technology edge, Sure Electronics has maintained an unwavering commitment to R&D since its birth. Sure Electronics is committing to making Class-D Safe, Utility, Reliable and Effective and making it widely accepted in Industry and Military territory. Aimed at improving efficiency, reducing power consumption consequently, and increasing power density, Sure Electronics, always attentive to the audio quality of its products, has been offering for many years a range of Audio, Power Supply and DSP solutions in High Performance and High Power Platform.
Three R&D groups are built as the independent department for different research area. Over ten topics and projects like Transparent Amplification, Beyond the Audio Frequency Researching are issued to provide theoretical support for our design.
In recent years, Sure Electronics has been paying much attention to the accumulation of patent technology and is always strengthening the investment and exploring of advanced technology, which is based on meeting core demand of the industry and improving the audio quality of Class D products. Now we have developed creative ideas in the heat dissipation, drive circuit, feedback system and control system.
For now, we have submitted more than 20 patent applications and is preparing for the application of New and High Technology Enterprise.