Login
Sign up

Mean Well HLG-320H-36A 36V 320W LED Driver

Home /
Home DIY (Garden, Yard) /
LED Assemblies - Heat Sink & Lens & LED Drivers

Mean Well HLG-320H-36A 36V 320W LED Driver[98]

★★★★★(65 recommends)

SKUPS-SP11472

139.00

Add To Cart
Buy Now

+

Description

This product is a 320W AC/DC LED driver featuring the dual modes constant voltage and constant current output. Thanks to its high efficiency, it is able to operate for -40 ~ +90°C case temperature under free air convection. The design of metal housing and IP67/65 ingress protection level allows it to fit both indoor and outdoor applications. This product is equipped with various function options, such as dimming methodologies so as to provide the optimal design flexibility for LED lighting system.

  • TypeLED Driver
  • StyleLED Driver
  • Output ChannelSingle
  • Constant Voltage + Constant Current mode output
  • Metal housing with class I design
  • Built-in active PFC function
  • IP67/IP65 rating for indoor or outdoor installations
  • Function options: output adjustable via potentiometer; 3 in 1 dimming
  • Typical lifetime > 62,000 hours
MODELHLG-320H-36A
OUTPUTDC VOLTAGE36V
CONSTANT CURRENT REGION (Note.4)18 ~ 36V
RATED CURRENT8.9A
RATED POWER320.4W
RIPPLE & NOISE(max.) (Note.2)250mVp-p
VOLTAGE ADJ. RANGEAdjustable for A/C-Type only(via built-in potentiometer)
32 ~ 39V
CURRENT ADJ. RANGEAdjustable for A/C-Type only(via built-in potentiometer)
4.45 ~ 8.9A
VOLTAGE TOLERANCE(Note.3)±1.0%
LINE REGULATION±0.5%
LOAD REGULATION±0.5%
SETUP, RISE TIME(Note.6)2500ms, 80ms/115VAC   500ms, 80ms/230VAC
HOLD UP TIME(Typ.)15ms/115VAC, 230VAC
INPUTVOLTAGE RANGE(Note.5)90 ~ 305VAC  127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC’ section)
FREQUENCY RANGE47 ~ 63Hz
POWER FACTOR(Typ.)PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.94/277VAC@ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONICDISTORTIONTHD< 20% (@ load≧50%/115VAC,230VAC; @ load≧75%/277VAC)  (Please refer to "TOTAL HARMONIC DISTORTION (THD)" section)
EFFICIENCY(Typ.) (230VAC)94.5%
EFFICIENCY(Typ.) (277VAC)95%
AC CURRENT(Typ.)3.5A/115VAC  1.65A/230VAC   1.45A/277VAC
INRUSH CURRENT(Typ.)COLD START 70A(twidth=1010μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER1 units(circuit breaker of type B)/2 units(circuit breaker of type C) at 230VAC
LEAKAGE CURRENT<0.75mA/277VAC
PROTECTIONOVER CURRENT(Note.4)95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE40 ~ 46V
Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATUREShut down and latch off o/p voltage, re-power on to recover
ENVIRONMENTWORKING TEMP.Tcase=-40 ~ +90°C (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
MAX. CASE TEMP.Tcase= +90°C
WORKING HUMIDITY20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +80°C, 10 ~ 95%RH
TEMP. COEFFICIENT±0.03%/°C (0 ~ 50°C)
VIBRATION10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC SAFETY STANDARDS UL8750(type”HL”), CSA C22.2 No. 250.0-08; ENEC EN61347-1, EN61347-2-13, EN62384 independent; GB19510.1, GB19510.14; Ip65 or IP67(except for HLG-320H C-type); J61347-1, J61347-2-13(except for HLG-320H C-type) approved;
WITHSTAND VOLTAGEI/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25°C/70% RH
EMC EMISSIONCompliance to EN55015, EN55032 (CISPR32) Class B, EN61000-3-2 Class C (@ load≧50%) ; EN61000-3-3, GB17743 and GB17625.1
EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV)
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 °C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.4. Please refer to “DRIVING METHODS OF LED MODULE.”5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.9. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particular TC point(or TMP, per DLC), is about 75°C or less. 10.Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com. 

QUESTIONS & ANSWERS

Copyright 2018 @ Sure Electronics Co., Ltd.

Confirm