Login
Sign up

Mean Well SE-600-48 48V 600W AC/DC Switching Power Supply

Home /
Power Supply for Industrial Application /
AC/DC Switching Mode Power Supply for Industrial Application

Mean Well SE-600-48 48V 600W AC/DC Switching Power Supply[297]

★★★★★(292 recommends)

SKUPS-SP11142

119.00

Add To Cart
Buy Now

+

Description

This power supply is ideally suited for use with amplifier projects. The regulated 48VDC, 12.5A design is capable of delivering 600watts of output. Overload, over voltage, and over temperature protection is built-in, shutting down the power supply to prevent damage and then restoring power upon recovery.

  • TypeAD/DC Power
  • StyleEnclosed
  • Output ChannelSingle
  • AC input active surge current limiting
  • AC input range selected by switch
  • Protections: Short circuit / Overload / Over voltage/ Over temperature
  • Forced air cooling by built-in DC fan
  • High power density 4.9w/in3
  • Built-in remote sense function
  • UL approved
  • Low cost
MODELSE-600-48
OUTPUTDC VOLTAGE48V
RATED CURRENT12.5A
CURRENT RANGE0 ~ 12.5A
RATED POWER600W
RIPPLE & NOISE(max.) (Note.2)200mVp-p
VOLTAGE ADJ. RANGE43 ~ 56V
VOLTAGE TOLERANCE (Note.3)±1.0%
LINE REGULATION±0.5%
LOAD REGULATION ±0.5%
SETUP, RISE TIME1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load
HOLD UP TIME(Typ.)20ms/230VAC  16ms/115VAC at full load
INPUTVOLTAGE RANGE 90 ~ 132VAC/180 ~ 264VAC selected by switch254 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY(Typ.)88%
AC CURRENT(Typ.)12A/115VAC  7.5A/230VAC
INRUSH CURRENT(Typ.)30A/115VAC  60A/230VAC
LEAKAGE CURRENT<2.0mA/240VAC
PROTECTIONOVERLOAD105 ~ 125% rated output power
Protection type: Shut down O/P voltage, re-power on to recover
OVER VOLTAGE57.6 ~ 67.2V
Protection type: Shut down O/P voltage, re-power on to recover
OVER TEMPERATURE85°C±5°C(TSW1) detect on heatsink of power transistor
Protection type: Shut down O/P voltage, recovers automatically after temperature goes down
ENVIRONMENTWORKING TEMP.-20 ~ +60°C (Refer to output load derating curve)
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85°C, 10 ~ 95%RH
TEMP. COEFFICIENT±0.05%/°C (0 ~ 50°C)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY SAFETY STANDARDS UL60950-1 approved
WITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25°C/70%RH
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.

QUESTIONS & ANSWERS

Copyright 2018 @ Sure Electronics Co., Ltd.

Confirm