Login
Sign up

Home /
Audio Amplifier Board /
All-in-one

2 x 30 Watt Class D Audio Amplifier Board w Bluetooth Ver4.0 -JAB2[641]

★★★★★(602 recommends)

SKUAA-JA32472

32.90

Add To Cart
Buy Now

+

Buy 31 for $32.571 each and save 1%

Buy 61 for $32.242 each and save 2%

Buy 92 for $31.913 each and save 3%

FREQUENTLY BOUGHT TOGETHER

1 x 60 Watt Class D Audio Amplifier Board w DSP - JAB3-160

$29.90

Add+

1 x 100 Watt Class D Audio Amplifier Board w DSP - JAB3-1100

$34.90

Add+

L-style Aluminium Bracket (JAB accessories)

$2.99

Add+

Cables Package for JAB (JAB accessories)

$4.99

Add+

3S18650 Lithium Battery Balance and Protection Extension Board (JAB accessories)

$7.99

Add+

Interface Extension Board with USB Charge Only (JAB accessories)

$5.99

Add+

2 x 50 Watt Class D Audio Amplifier Board with Audio DSP - JAB3-250 (for Gaming Kiosks)

$34.90

Add+

2 x 30 Watt Class D Audio Amplifier Board with Audio DSP - JAB3-230 (for Gaming Kiosks)

$29.90

Add+

Description

As a member of JAB(Audio Amplifier Boards designed for Jukecase) series, JAB2 offers the wireless solutions with Bluetooth module integrated and can be powered by lithium batteries directly. It is a stereo Class D audio amplifier board with a Texas Instruments TPA3118 chip to achieve high efficiency. Each channel is capable of delivering outputting nominal power simultaneously and continuously. The module dissipates only 0.72W with no signal when in ON mode (around 0.07W when in stand-by mode). Excellent heat dissipation eliminates the requirement of an extra heatsink and increases its reliability. Over current protection and over temperature protection are included to extend the longevity of the amplifier board. All these features make it a good choice for portable Bluetooth speakers.



Video for introduction of JAB2: video link

Video for introduction of Bluetooth control: video link

Video for connection with JAB3: video link

  • StyleBoards
  • Number Of Channel(s)2
  • Output Power30
  • Size3.6 x 2.7 inches (91.44mm x 68.58mm)
  • ChipsetTPA31xx
  • Heat DissipationNo Heat Sink & FAN
  • Supported Parallel Bridge Tied Load ModeYES
  • inputBluetooth, Single ended Line-in,
  • Power Voltage10V-24V
  • 3.6 x 2.7 Inches PCB Size
  • Bluetooth V4.0 APT-X +EDR, A2DP
  • Power Management Circuit
  • 3.5mm AUX Port
  • Volume Control Port (Potentiometer)
  • Power Switch Port
  • LED Status Indicators (Power, Battery Charging, Bluetooth)
  • Disconnection from Lithium Battery
  • Higher Output Power with Power Adapter
  • PBTL Configurable
  • Extension Board Supported (Coming soon)
Specifications typical @ +20℃, Powered by 19V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter Conditions Min. Typ.  Max. Units
Power Supply Range - - 19 24 VDC
Idle Power/Current SD short to GND, BT Disconnected - 37 50 mA
BT Connected - 42 55 mA
Standby Power/Current SD short to GND, only when low power module available - 2.9 5 mA
Battery Undervoltage Protection* - - 10.4 10.5 V
Constant Charging Voltage - - 12.3 12.7 V
Charge Current - - 0.5 1 A
Specifications typical @ +20℃,Powered by 19V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter Conditions Min. Typ. Max. Units
Gain -     18 26 36 dB
Output Power 19V @ 8Ω 2 x 30    W
THD 19V @ 8Ω,10W, 1KHz - 0.07 - %
Output Noise Level A-weighting,Input Connected to GND       - 213 - µV
SNR 19V, 10W @ 8Ω, THD+N=1% - 89.3 - dB

per-4.jpg

QUESTIONS & ANSWERS

Kirill.Kuptsov

28 Oct 2019

Hello. Is it possible to use it with digital potentiometer AA-AA11117?

Hello, Kirill. Thank you for your interest in our products. The JAB2-230 cannot be used with AA-AA11117. If you want to adjust the volume of JAB2-230, there is a VOLUME CONTROL CABLE (POTENTIOMETER INCLUDED) inside the functional cables package (AA-JA11114). Here is the link for your reference: http://store.sure-electronics.com/product/AA-JA11114

Copyright 2019 @ Sure Electronics Co., Ltd.

Confirm