Login
Sign up

1 x 2000 Watt 2Ohm Class D Audio Amplifier Brick - T-AMP

Home /
Audio Amplifier Board /
High Power(300W-3kW per channel)

1 x 2000 Watt 2Ohm Class D Audio Amplifier Brick - T-AMP[631]

★★★★★(919 recommends)

SKUAA-BK31382

189.00

Add To Cart
Buy Now

+

Buy 6 for $187.11 each and save 1%

Buy 11 for $185.22 each and save 2%

Buy 16 for $183.33 each and save 3%

Description

It is a mono Class D audio amplifier board capable of delivering 2000W @ 2 Ohm. It features low distortion and high efficiency by using Sure Electronics T-AMP technology. By means of dedicated heatsink design with a temperature controlled fans, it is able to maximize heat dissipation. Over current protection and over temperature protection are included to extend its longevity and ensure its reliability. It is flexibly connected and has high power density.

  • StyleBoards
  • Number Of Channel(s)1
  • Output Num2000
  • Size3.9 x 3.9 inches (99.06mm x 99.06mm)
  • ChipsetT-AMP
  • Heat DissipationHeat Sink & FAN
  • Supported Parallel Bridge Tied Load Mode/
  • inputSingle ended Line-in, Differential Line-in,
  • Power Voltage72V-120V
  • 3.9 x 3.9 inches Compact PCB Size
  • Output Power
  • 2000W@2Ohm 96V DC THD+N 10%
  • 1500W@2Ohm 96V DC THD+N 1%
  • Flexible Connection and High Power Density
  • Anti-reverse Power Supply Connection
  • Audio Signal Detection
  • Temperature Control Fan 
  • Differential and Single-ended Optional
  • High Level and Low Level Gain
  • Power and Clip Indicator
  • Full Protection
  • Optimized Heatsink Design
ParameterConditionsMin.Typ. Max.Units
Number of Channels--1--
Minimum Load Impedance--2-Ω
Efficiency2000W @2Ohm,100V,1kHz-90-%
Nominal Power Requirement--1200-W
Operating Voltage-48100120V
Idle PowerSignal detected(Load 4 Ohm)Fan on-15- W
Fan off-14-
No Signal detected-1.2-W
Standby PowerSD Connected to GND, Fan OFF-1-W
Switching FrequencySD Floating@100V-700-kHz
Power Consumption1/4 of max output power@4Ohm,100V-450- W
1/8 of max output power@4Ohm,100V-250-
Control StandbyPull down to GND current *-100-μA
ParameterConditionsMin.Typ.Max.Units
 Input Sensitivity 1000W@2Ohm,100V,1kHzSEGain H-0.6-Vrms
Gain L-1.0-
DIFFGain H-0.65-
Gain L-0.9-
SNR 200W@4OhmA-weightingSEGain H-95-dB
Gain L-96-
DIFFGain H-94-
Gain L-95-
THD+N 10W@4Ohm,1kHzSE-0.02-%
DIFF-0.03-
100W@4Ohm,1kHzSE-0.08-
DIFF-0.08-
Input ImpedanceSEGain H-15-
Gain L-15-
DIFFGain H-15-
Gain L-15-
Output Noise LevelA-weightingInput Connected to GNDSE-400-uV
DIFF-350-
DC Offset@4Ohm, 100V-50-mV
Bandwidth@4Ohm, 100V20-20kHz
Gain@4Ohm,_1_kHzGain(H)-40-dB
Gain(L)-36-
Output monitorGain=350W @2Ohm,100V,1kHz--39-

per-1.png

per-3.png

per-4.png

per-2.png

QUESTIONS & ANSWERS

Copyright 2018 @ Sure Electronics Co., Ltd.

Confirm