Login
Sign up

Home /
Audio Signal Transceiver /
Bluetooth Receiver

Bluetooth Audio Receiver Board V4.0 with Control Panel - BRB6P[701]

★★★★★(0 recommends)

SKUAA-AB41158

29.90

Add To Cart
Buy Now

+

Buy 34 for $29.601 each and save 1%

Buy 67 for $29.302 each and save 2%

Buy 101 for $29.003 each and save 3%

FREQUENTLY BOUGHT TOGETHER

Huntkey HKA02412020-8D 12V 2A 24W AC/DC Power Adapter

$14.90

Add+

Bluetooth Pairing Name Programming (store@sure-electronics.com)

$0.99

Add+

Description

Sure Electronics is proud to announce its release of its brand new Bluetooth V4.0 Audio Receiver Board with Control Panel - BRB6P. BRB6P is a family member of the High Sound Quality BRB Series, offering exceptional audio fidelity, with low noise and low distortion. To fit for most DIYer’s requirements of easy installation, a pre-drilled control panel will come with the receiver board, for music menu control, like volume control, the next song, pause, stop control. Besides that, with an integrated AUX input port, this module also supports wired line in input, which is a good balance between flexibility and high performance.



Introduction and demonstration: video link

  • Board TypeBoard
  • inputBluetooth,
  • output3.5mm AUX,
  • SizeOthers
  • Power Voltage10V-24V
  • CSR8645 Chipset
  • Bluetooth V4.0 +EDR, A2DP, AAC
  • Power Supply: Supporting 3s 18650 Battery Board
  • Closable Backlight Buttons
  • Closable Backlight Buttons
  • (I-PEX Micro RF Coax Connector)
  • External Bluetooth Antenna included
  • (Default Package: I-PEX Antenna, I-PEX to SMA solution available.)
  • Bluetooth Pairing Name Customizable
  • Mounted Control Panel for Channel Selection, Volume Control and Song Switching.
  • Line Signal Straight Through
Specifications typical @+25℃, Powered by 12V DC, unless otherwise noted. Specifications subject to change without notice.
ParameterConditionsMin.Typ. Max.Units
Power Supply-10.51224VDC
DistortionVo=700mVrms, f=1kHz0.12%
Quiescent CurrentVin=12V-2030mA
Maximum Current--3540mA
BT Wireless Range(with BT Antenna)-10--m
Operating Temperature-02055
Storage Temperature--4020 105
Specifications typical @+25℃, Powered by 12V DC, unless otherwise noted. Specifications subject to change.
ParameterConditionsMin.Typ.Max.Units
THDVin=775mVrms, f=1kHz-0.002-%
Output Noise LevelVin=12V       -5.1-µV
SNRVin=775mVrms, f=1kHz-94-dB

QUESTIONS & ANSWERS

Simone.Rossi

29 Aug 2020

Hello the AA-AB41158 bt reciver has stereo output, how should I connect to mono AA-JA31211to listen both channel ? Thanks

Hello, Simone. There is a 3.5mm line output (J4) on BRB6P. You can connect with AA-JA31211 through the this port. Wish this could help you.

Simone.Rossi

28 Jul 2020

Hello , does BRB6Ppower button could power or stand by jab amplifier board too? Thanks Simone

Hi, Simone. Thank you for your interest in our products. The power button on BRB6P cannot control JAB amplifiers. Wish this could help you.

Athanasios.Baxevanis

23 Jun 2020

Hi , when i conect the reciver through the 3.5 mm out to my jab 3 line in there is a very annoying transmission sounda all the time. You can hear that even when the amplifier is playing in low volumes any suggestion would be more than helpfull thanks.

Hi, Athanasios. Please try to use one cable to connect the ground of the JAB3 and the BRB6P. If there is still noise, could you send a video to store@sure-electronics.com? We will give suggestions based on your connection. Wish this could help you.

Athanasios.Baxevanis

11 Jun 2020

Hi what cable do I need in order to connect a BRB6P with a JAB3 amplifier?

Hi, Athanasios. To connect BRB6P with JAB3, audio cable (3.5mm to 3.5mm) and power cables would be required. Wish this could help you.

Athanasios.Baxevanis

06 Jun 2020

Hi can I connect this blutooth reciver to control a Jab3 amplifier instead of using a traditional potenciometer? I like the conrol layout with buttons rather than a Knob. Thanks in advance.

Hi, Athanasios. Thank you for your interest in our products. You can connect BRB6P with JAB3. But please be noted that, the potentiometers on JAB3 is used to control gain, volume and cut-off frequency (Please refer to datasheet for detailed information.) and the buttons on BRB6P is used to control volume, switch songs and play/pause. The functions are different. If you want external potentiometers instead of on-board ones, we can customize for you. Since there is modification, MOQ would be required. Please send emails to store@sure-electronics.com if you have interests. Wish this could help you.

Athanasios.Baxevanis

06 Jun 2020

Hi can I connect this blutooth reciver to control a Jab3 amplifier instead of using a traditional potenciometer? I like the conrol layout with buttons rather than a Knob. Thanks in advance.

Hi, Athanasios. Thank you for your interest in our products. You can connect BRB6P with JAB3. But please be noted that, the potentiometers on JAB3 is used to control gain, volume and cut-off frequency (Please refer to datasheet for detailed information.) and the buttons on BRB6P is used to control volume, switch songs and play/pause. The functions are different. If you want external potentiometers instead of on-board ones, we can customize for you. Since there is modification, MOQ would be required. Please send emails to store@sure-electronics.com if you have interests. Wish this could help you.

Lars Erik.Nordbø

28 Apr 2020

Where to buy J5 PH-4POS-2mm

Hi, Lars Erik. You can buy the connectors on eBay. Or if you only need several pieces, we can send to you as gifts. Please place an order with us then send an email to store@sure-electronics.com to remind us. We will put the connectors in the package together with the goods you buy. Wish this could help you.

Sebastian.Roderfeld

24 Apr 2020

Can you please provide a picture where the positions of the mounting holes are visible? In the Datasheet only the outer dimension is visible.

Hi, Sebastian. Please take the attached picture for reference. Wish this could help you.

Brennen.Hazen

21 Jun 2019

Can I use this with the 5s battery charging board (BCPB4)?

Hi, Brennen. You can use the BCPB4 to power this Bluetooth Audio Receiver Board V4.0 with Control Panel - BRB6P. Wish this could help you. Please feel free to contact us if you have any other questions.

Mark.Young

11 Apr 2019

How do connect this up to power on and and turn off the backlighting when use a battery board SKUPS-BC12113 and SKUAA-AB32179 using a meanswell power supply

Hi, Mark. You can use battery board to power BRB6P through J5 and turn off the backlight through SW8 of BRB6P. The user manual of BRB6P can be downloaded in the product page. Wish it could help you. If you still have problem, please contact us with store@sure-electronics.com.

Copyright 2020 @ Sure Electronics Co., Ltd.

Confirm