Login
Sign up

Home /
Audio Amplifier Board /
Mid Power(30-300W per channel)

2 x 100Watt Class D Audio Amplifier Board - T-AMP[603]

★★★★★(879 recommends)

SKUAA-AB32971

34.90

Add To Cart
Buy Now

+

Buy 29 for $34.551 each and save 1%

Buy 58 for $34.202 each and save 2%

Buy 86 for $33.853 each and save 3%

FREQUENTLY BOUGHT TOGETHER

Digitally Controlled Stereo Electronic Audio Volume Control Module VC01-M62429

$5.99

Add+

Description

This stereo mid-power audio amplifier board is capable of delivering 100W output power per channel into a 4Ohm load based on Class D topology and Sure Electronics’ T-AMP technology, featuring high efficiency up to 93% and high sound quality with low distortion and low noise level. Easy installation, mid power output and high reliability makes this audio amplifier board suitable for home audio, DIY audio, car audio, home theater and demanding industrial applications. A DC15V – 27V power supply is required.

High Quality Audio Performance

By means of dedicated PCB layout design and engineers’ attentive debugging, this mid-power audio amplifier board features high audio performance, whose THD+N performs well as 0.003% @ 4Ohm, 1W, 1kHz.

High Reliability and Long Service Time

A low noise, temperature-controlled fan together with an optimized robust heatsink are mounted atop the amplifier board to ensure sufficient heat dissipation. Full protection circuit, like over temperature protection and overcurrent protection, is equipped on this board for high reliability and long service time.

Easy for Installation

Four screw holes provided make this amplifier board easy for installation and quick for integration in any cabinet. Thanks to the pre-mounted industrial terminal interfaces, all you need to do is to plug in cables for connection, without any demand of soldering, which is swift and convenient. Power and clip indicator are provided on board for customers to have an overview of the power condition of the amplifier board.

External Volume control

This mid-power amplifier board supports WONDOM plug-in volume control module (VC01). You can adjust volume through the potentiometer board.



Package Includes

1pc AA-AB32971



Video for connection with WONDOM Bluetooth receiver board and volume control board:

video link

Video in 3D version for introduction: video link

  • StyleBoards
  • Number Of Channel(s)2
  • Output Power100
  • Size4.8 x 3.6 inches (121.92mm x 91.44mm)
  • ChipsetT-AMP
  • Heat DissipationHeat Sink & FAN
  • Supported Parallel Bridge Tied Load ModeNO
  • inputSingle ended Line-in,
  • Power Voltage15V-27V
  • Output Power
  • 100W@4Ohm 27V DC THD+N 10%
  • 72W@4Ohm 27V DC THD+N 1%
  • Power and Clip Indicator
  • Temperature Control Fan
  • Over current Protection
  • Over temperature Protection
  • Optimized Heatsink Design
  • Support Volume Control Board (VC01)
  • Weight: 482g/ 1.06 lbs (±10%)
  • Size: 4.80 x 3.60 x 1.53 inches
Specifications typical @ +25℃, powered by 27V DC, unless otherwise noted. Specifications subject to change without notice.
ParameterConditionsMin.Typ. Max.Units
Power Supply-1527-VDC
Idle PowerSD Floating, FAN ON-715W
SD Floating, FAN OFF-612W
Standby PowerSD Connected to GND, FAN OFF-0.82W
Maximum Current 200W @ 4Ohm -8.0-A
Efficiency100W @ 4Ohm -93-%
Minimum Load Impedance--3-Ω
Switching FrequencySD Floating-770-KHz
Fan Active @ Temperature--50-
Specifications typical @ +25℃, powered by 27V DC, unless otherwise noted. Specifications subject to change without notice.
ParameterConditionsMin.Typ.Max.Units
Gain-283032dB
Input Sensitivity(RMS)@4Ω,100W,1KHz-610-mV
Input Impedance--10-
Output Power@4Ω THD+N 1%-72-W
@4Ω THD+N 10%-100-W
Bandwidth @ ±3dB@4Ω20-20K   Hz
THD@4Ω, 1W, 1KHz-0.003-%
@4Ω, 10W, 1KHz-0.005-%
Output Noise LevelA-weighting, Input Connected to GND       -270-µV
SNR72W @4Ω THD+N 1%-85-dB

per-3.jpg

per-1.jpg

per-2.jpg

per-4.jpg

QUESTIONS & ANSWERS

Lars Erik.Nordbø

27 Apr 2020

I was wondering if the optional J16 Terminal Block RJ128 is included, since it is not on the board in the pictures

Hi, Lars Erik. The J16 RJ128 terminal block is not mounted in default. If you want it, we can install it for you. Please kindly be noted that MOQ is 50pcs. Wish this could help you.

Lars Erik.Nordbø

27 Apr 2020

I want to buy this product, but i would like to know if the optional J16 Terminal Block RJ128 is included, since it is not on the board in the pictures.

Hi, Lars Erik. Thank you for your interest in our product. The J16 terminal block is not mounted in default. If you want it, we can install it for you. Please kindly be noted that MOQ is 50pcs. Wish this could help you.

Igor.Stoyanov

31 May 2019

I want to buy this product, is shipping included? I live in Moscow

Hi, Igor. Thank you for your interest in our product. We can deliver parcel to Moscow and the shipping methods depends on the weight of parcel and your requirements. If the weight is within 2kg, we can arrange shipment for you with China Post and it will be free. It may take 20-25 days for you to receive it. If the weight is beyond 2kg or you prefer express, we will arrange shipment -for you by EMS and additional shipping cost would be required. It may take 10-15 days. You can contact with our customer service for further discussion.

Copyright 2020 @ Sure Electronics Co., Ltd.

Confirm