Sign up

2 x 1500Watt Class D Audio Amplifier Board - T-AMP - HV

Home /
Audio Amplifier Board /
High Power(300W-3kW per channel)

2 x 1500Watt Class D Audio Amplifier Board - T-AMP - HV[677]

★★★★★(98 recommends)



Add To Cart
Buy Now


Buy 4 for $296.01 each and save 1%

Buy 7 for $293.02 each and save 2%

Buy 11 for $290.03 each and save 3%


This stereo Class D audio amplifier board is capable of delivering 1500 watt per channel. Powered by wide power range from DC48V to 120V, it features audio signal detection, flexible input sensitivity, high sound quality, low power consumption and ease of integration. A low-noise cooling fan is mounted atop the robust heatsink for a drastic reduction for the system temperature and ease of cooling. Its reliability and longevity is ensured by a variety of protection including over/under voltage protection, over current protection, over temperature protection and high voltage anti-revising protection.

  • StyleBoards
  • Number Of Channel(s)2
  • Output Power1500
  • Size6 x 4.5 inches (152.4mm x 114.3mm)
  • ChipsetT-AMP
  • Heat DissipationHeat Sink & FAN
  • Supported Parallel Bridge Tied Load ModeNO
  • inputALL, Bluetooth,
  • Power Voltage48V-200V
  • 6 x 4.5 Inches PCB Size
  • Output Power
  • 2000W@2Ohm 96V DC THD+N 10%
  • 1500W@2Ohm 96V DC THD+N 1%
  • Wide Power Supply Range from DC48V - 120V
  • Flexible load character from 1.5Ω to 16Ω
  • Audio Signal Detection
  • Optimized Thermal Control
  • High Voltage Anti-Reversing Protection
  • Capacitive loads and Resistive loads supported
  • Power and Clip Indicator
  • Flexible Input Sensitivity
  • DSP Input Module Supported (Optional)
Power Supply-48150172V
Number of Channels-- 2--
Minimum Load Impedance--46Ω
Efficiency2X1500W@6Ohm 90 %
Nominal Power Requirement@150V-1100-W
Operating Voltage-48150172V
Idle PowerSignal detected(Load 6 Ohm)FANON-18-W
No Signal detected-2-W
Switching FrequencySD Floating@150V-400-kHz
Power Consumption1/4 of max output power@6Ohm, 150V-900-W
1/8 of max output power@6Ohm, 150V-500-W
Control Standby(Low = inputs enabled)High-level Input Voltage3.3-5.5V
Low-level Input Voltage- 0.4V
Standby PowerSD short to GND, only when low power module available-2-W
Under Voltage Protection--40 V
Input Sensitivity1500W@6Ohm, 1kHz-1.7-V
SNR900W@6Ohm, THD+N 1%, A-weighting-99-dB
THD+N1W@6Ohm, 1kHz-0.05-%
10W@6Ohm, 1kHz-0.03-%
Input Impedance--10-
Output Noise LevelA-weighting, Input Connected to GND-570-uV
DC Offset--50-mV
Crosstalk Separation10W@6Ohm, 1kHz--80-dB
Gain@6Ohm, 1kHz-35-dB






Copyright 2019 @ Sure Electronics Co., Ltd.