Login
Sign up

1 x 1000Watt Class D Audio Amplifier Board - T-AMP - LV

Home /
Audio Amplifier Board /
High Power(300W-3kW per channel)

1 x 1000Watt Class D Audio Amplifier Board - T-AMP - LV[670]

★★★★★(87 recommends)

SKUAA-AB31395

129.00

Add To Cart
Buy Now

+

Buy 8 for $116.1 each and save 10%

Buy 16 for $103.2 each and save 20%

Buy 24 for $90.3 each and save 30%

Description

This mono Class D audio amplifier board is capable of delivering 1000 watt into 2 Ohm load. Powered by wide power range from DC48V to 120V, it features audio signal detection, flexible input sensitivity, high sound quality, low power consumption and ease of integration. A low-noise cooling fan is mounted atop the robust heatsink for a drastic reduction for the system temperature and ease of cooling. Its reliability and longevity is ensured by a variety of protection including over/under voltage protection, over current protection, over temperature protection and high voltage anti-revising protection.

  • StyleBoards
  • Number Of Channel(s)1
  • Output Num1000
  • Size6 x 4.5 inches (152.4mm x 114.3mm)
  • ChipsetT-AMP
  • Heat DissipationHeat Sink & FAN
  • Supported Parallel Bridge Tied Load Mode/
  • inputSingle ended Line-in,
  • Power Voltage48V-72V
  • 6 x 4.5 Inches PCB Size
  • Output Power
  • 2000W@2Ohm 96V DC THD+N 10%
  • 1500W@2Ohm 96V DC THD+N 1%
  • Wide Power Supply Range from DC48V - 120V
  • Flexible load character from 1.5Ω to 16Ω
  • Audio Signal Detection
  • Optimized Thermal Control
  • High Voltage Anti-Reversing Protection
  • Capacitive loads and Resistive loads supported
  • Power and Clip Indicator
  • Flexible Input Sensitivity
  • DSP Input Module Supported (Optional)
ParameterConditionsMin.Typ.Max.Units
Number of Channels--1--
Minimum Load Impedance--1.5-Ω
Efficiency100W@2Ohm-90-%
Nominal Power Requirement@60V, 2Ohm-1200-W
Operating Voltage-486072V
Idle PowerSignal detected (Load 2 Ohm)FAN ON-25-W
FAN OFF-24.3-
No Signal detected-3.5-W
Switching FrequencySD Floating@84V-600-kHz
Power Consumption1/4 of max output power@2Ohm,100V-300-W
1/8 of max output power@2Ohm, 100V-150-W
 ControlStandby(Low = inputs enabled)High-level Input Voltage3.3-5.5V
Low-level Input Voltage--0.4V
Standby PowerSD short to GND, only when low power module available-3.5-W
Under Voltage Protection--41-V
ParameterConditionsMin.Typ.Max.Units
Input Sensitivity1000W@2Ohm, 1kHz-1.3-Vrms
SNR400W@2Ohm,  A-weighting-100-dB
THD+N10W@4Ohm, 1kHz-0.04-%
100W@4Ohm, 1kHz-0.08-%
Input Impedance--10-
Output Noise LevelA-weighting, Input Connected to GND-450-uV
DC Offset--50-mV
Bandwidth-20-20kHz
Gain@2Ohm, 1kHz-30-dB

Per_1_FR.png

Per_3_THD+N.png

Per_2_NO.png

Per_4_BUT.png

QUESTIONS & ANSWERS

Copyright 2018 @ Sure Electronics Co., Ltd.

Confirm