Login
Sign up

Home /
Audio Amplifier Board /
All-in-one

1 x 100 Watt Class D Audio Amplifier Board with Bluetooth - JAB2 - 1100[743]

★★★★★(0 recommends)

SKUAA-JA31182

37.90

Add To Cart
Buy Now

+

FREQUENTLY BOUGHT TOGETHER

Bluetooth Pairing Name Programming (store@sure-electronics.com)

$0.99

Add+

L-style Aluminum Bracket (JAB accessories)

$2.99

Add+

Cables Package for JAB (JAB accessories)

$4.99

Add+

3S18650 Lithium Battery Balance and Protection Extension Board (JAB accessories)

$7.99

Add+

Interface Extension Board with USB Charge Only (JAB accessories)

$5.99

Add+

2 x 50 Watt Class D Audio Amplifier Board with Audio DSP - JAB3-250 (for Gaming Kiosks)

$34.90

Add+

2 x 30 Watt Class D Audio Amplifier Board with Audio DSP - JAB3-230 (for Gaming Kiosks)

$29.90

Add+

Description

As a member of JAB(Audio Amplifier Boards designed for Jukecase) series, JAB2 offers the wireless solutions with Bluetooth module integrated and can be powered by lithium batteries directly. This is the mono version, which is capable of delivering 100W @ 2Ohm with a Texas Instruments TPA3116 chip to achieve high efficiency. The module dissipates only 0.72W with no signal when in ON mode (around 0.07W when in stand-by mode). Optimized heat sink design increases its reliability. Over current protection and over temperature protection are included to extend the longevity of the amplifier board. All these features make it a good choice for portable Bluetooth speakers.



Video for introduction of JAB2: video link

Video for introduction of Bluetooth control: video link

Video for connection with JAB3: video link

  • StyleBoards
  • Number Of Channel(s)1
  • Output Power100
  • Size3.6 x 2.7 inches (91.44mm x 68.58mm)
  • ChipsetTPA31xx
  • Heat DissipationHeat Sink
  • Supported Parallel Bridge Tied Load Mode/
  • inputBluetooth, Single ended Line-in,
  • Power Voltage12V-24V
  • 3.6 x 2.7 Inches PCB Size
  • Bluetooth V4.0 APT-X + EDR, A2DP
  • Lithium Battery Board Supported
  • Bluetooth Control Port
  • Higher Output Power with Power Adapter
  • Anodizing Aluminum Heatsink
  • LED Indicators Ports (Power, Battery Charging& Bluetooth)
  • 3.5mm AUX-IN Port
  • Volume Control Port (Potentiometer)
  • Power Switch Port
Specifications typical @ +20℃, Powered by 19V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter Conditions Min. Typ.  Max. Units
Power Supply Range - 12 19 24 VDC
Idle Power/Current SD short to GND, BT Disconnected - 40 50 mA
BT Connected - 45 55 mA
Standby Power/Current SD short to GND, only when low power module available - 3.2 5.5 mA
Battery Undervoltage Protection* - - 10.4 10.5 V
Constant Charging Voltage - - 12.3 12.7 V
Charge Current - - 0.5 1 A
Parameter Conditions Min. Typ. Max. Units
Gain -     18 26 36 dB
Output Power 19V @ 2Ω 1 x 100    W
THD @ 2Ω,10W, 1kHz - 0.02 - %
Output Noise Level A-weighting,Input Connected to GND       - 185 - µV
SNR 10W @ 2Ω, THD+N=1% - 92 - dB
 

per-1.JPG

per-4.jpg

per-3.JPG

per-2.JPG

QUESTIONS & ANSWERS

Copyright 2020 @ Sure Electronics Co., Ltd.

Confirm