Login
Sign up

Mean Well LRS-200-24 24V 200W AC/DC Switching Power Supply

Home /
Power Supply for Industrial Application /
AC/DC Switching Mode Power Supply for Industrial Application

Mean Well LRS-200-24 24V 200W AC/DC Switching Power Supply[691]

★★★★★(153 recommends)

SKUPS-SP11621

42.90

Add To Cart
Buy Now

+

Description

This power supply is ideally suited for use with amplifier projects. The regulated 24VDC, 8.8A design is capable of delivering 200watts of output. Overload, over voltage, and over temperature protection is built-in, shutting down the power supply to prevent damage and then restoring power upon recovery.

  • TypeAD/DC Power
  • StyleEnclosed
  • Output ChannelSingle
  • AC input range selectable by switch
  • Withstand 300VAC surge input for 5 second
  • Protections: Short circuit / Overload / Over voltage/ Over temperature
  • Cooling by free air convection
  • 1U low profile
  • Withstand 5G vibration test
  • LED indicator for power on
  • No load power consumption
MODELLRS-200-24
OUTPUTDC VOLTAGE24V
RATED CURRENT8.8A
CURRENT RANGE0 ~ 8.8A
RATED POWER211.2W
RIPPLE & NOISE(max.) (Note.2)150mVp-p
VOLTAGE ADJ. RANGE21.6 ~ 28.8V
VOLTAGE TOLERANCE (Note.3)±1.0%
LINE REGULATION (Note.4)±0.5%
LOAD REGULATION (Note.5)±0.5%
SETUP, RISE TIME1500ms, 50ms/230VAC 1500ms, 50ms/115VAC at full load
HOLD UP TIME(Typ.)16ms/230VAC  12ms/115VAC at full load
INPUTVOLTAGE RANGE90 ~ 132VAC/ 180 ~ 264VDC by switch240 ~ 370VDC(switch on 230VAC)
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY(Typ.)89.5%
AC CURRENT(Typ.)4A/115VAC  2.2A/230VAC
INRUSH CURRENT(Typ.)COLD START 60A/115VAC  60A/230VAC
LEAKAGE CURRENT<2mA/240VAC
PROTECTIONOVERLOAD(Note.8)110 ~ 140% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE28.8 ~ 33.6V
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATUREHiccup mode, recovers automatically after fault condition is removed
ENVIRONMENTWORKING TEMP.-25 ~ +70°C (Refer to “Derating Curve”)
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85°C, 10 ~ 95%RH
TEMP. COEFFICIENT±0.03%/°C (0 ~ 50°C)
VIBRATION10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY SAFETY STANDARDS UL60950-1 approved
WITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/ 500VDC / 25°C / 70% RH
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.4. Line regulation is measured from low line to high line at rated load.5. Load regulation is measured from 0% to 100% rated load.6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.7. The 150% peak load capability is built in for up to 1 second for 12~48V. LRS-200 will enter hiccup mode if the peak load is delivered for over 1 second and will recover once it resumes to the rated current level (115VAC/230VAC).8. The ambient temperature derating of 5°C/1000m is needed for operating altitude greater than 2000m (6500ft).

QUESTIONS & ANSWERS

Copyright 2018 @ Sure Electronics Co., Ltd.

Confirm